Installation » History » Version 2
Luke Murphey, 01/08/2015 05:26 AM
| 1 | 1 | Luke Murphey | h1. Installation |
|---|---|---|---|
| 2 | 1 | Luke Murphey | |
| 3 | 1 | Luke Murphey | h2. Step 1: Verify Compatibility & Install App |
| 4 | 1 | Luke Murphey | |
| 5 | 1 | Luke Murphey | h2. Step 2: Setup Input |
| 6 | 1 | Luke Murphey | |
| 7 | 1 | Luke Murphey | h2. Step 3: Configure Device Data |
| 8 | 1 | Luke Murphey | |
| 9 | 1 | Luke Murphey | h2. Step 4: Setup Thermostat to Send Data (optional) |
| 10 | 1 | Luke Murphey | |
| 11 | 2 | Luke Murphey | # Shutdown any existing connections to the PLM (since it will allow only one connection at a time). |
| 12 | 2 | Luke Murphey | # Run HouseLinc and connect to the PLM. |
| 13 | 2 | Luke Murphey | # Register the thermostat with HouseLinc (by pressing the set button and having HouseLinc look for the device) |
| 14 | 2 | Luke Murphey | # Create an alert in the Houselinc. This is done simply to make sure that HouseLinc sets up the thermostat with the PLM such that all of the events are monitored. You can disable the alert after you create it. |
| 15 | 2 | Luke Murphey | |
| 16 | 1 | Luke Murphey | h2. Step 5: Configure Device Information (optional) |
| 17 | 1 | Luke Murphey | |
| 18 | 1 | Luke Murphey | h2. Step 6: Annotate Events (optional) |